How to Rewire Your Home Without Dying – Lesser Known Historical Wiring Methods

Introduction

Rewiring a home can be a daunting task, but with the right knowledge and preparation, it can be done safely without electrocuting yourself. In this comprehensive guide, I will walk you through some of the lesser known historical wiring methods that allow you to rewire your home without dying or burning it down.

Assess Your Electrical Needs

Before ripping out walls and playing with live wires, the first step is to carefully assess what needs rewiring and why. Consider the following:

• Overloaded circuits - If your lights dim or breakers trip when too many appliances are on, you likely need thicker gauge wiring and more circuits.

• Old wiring - Knob and tube wiring from the early 1900s can be a fire hazard. Upgrading to modern wiring should be a priority.

• Insufficient outlets - If your home lacks enough outlets for today's myriad of devices, adding more circuits and outlets will be necessary.

• Grounding issues - Ungrounded two prong outlets need upgrading to grounded three prong outlets for safety.

• Major renovations/additions - Any major structural changes to your home will require rewiring.

Thoroughly assessing your needs first allows you to plan the scope of the rewiring project.

Safety Gear and Precautions

Before handling any wires, proper safety gear and precautions are an absolute must:

• Electrical gloves - Insulated rubber gloves rated for the volt age in your home prevent shocks.

• Safety goggles - Protect your eyes from debris while working.

• Current tester - Use a non-contact voltage tester to safely identify live wires before touching.

• Circuit breakers - Switch off and verify the power is off at the main breaker panel before working.

• Electrical tape - Insulate and protect all wiring connections.

• Fire extinguisher - Have an ABC extinguisher on hand in case of electrical fire.

• Space heaters - If remodeling during winter, use space heaters and insulate walls to avoid freezing pipes.

Following proper safety procedures minimizes the risks inherent with electrical work.

Historical Wiring Methods

Now let's explore some of the retro wiring techniques used in old homes:

Knob and Tube Wiring

This obsolete wiring from 1880-1930 has hot and neutral wires run through ceramic knobs separated by tubes:

Pros: Air gaps between wires provide excellent insulation.

Cons: Outdated, hazardous, insufficient for modern loads.

To rewire knob and tube, I recommend running all new wiring through conduits or stapled along wall studs. Phasing it out section by section starting with high priority areas is wise.

Cloth-Covered Wiring

From 1930-1950, wiring was insulated with cloth instead of rubber or plastic:

Pros: More durable than modern wire.

Cons: Cloth decays over time, flammable.

I suggest replacing any original cloth wiring that is cracked or frayed. Handle it gently as disturbance can degrade the insulation further.

Metal-Clad Wiring

Used from 1920-1950, this type has rubber insulated hot and neutral wires wrapped in grounded metal casing:

Pros: Armored protection, integral grounding.

Cons: Metal covering makes bending and revisions difficult.

Metal-clad wiring is fairly robust, but upgrading it allows easier access for maintenance and renovations down the road.

Conduit Wiring

Widely used from 1930 onward, conduit wiring runs insulated wires through hollow metal or plastic tubes:

Pros: Flexible, durable, protects wires from damage.

Cons: Rigid conduits are hard to retrofit.

Conduit wiring just needs updating if the actual wires are too small gauge or deteriorated. Flexible thin-wall conduit is handy for renovations.

Installing New Wiring

When installing replacement wiring, here are some tips to do it safely and cleanly:

Mapping

• Create a detailed wiring diagram showing all circuits, fuse/breaker amperages, outlets, switches and junctions. This will guide the new installation.

Concealing Wires

• For walls, run wires vertically inside stud bays, stapled neatly every 18".

• In attics/basements, run wires along beams and joists, anchored tightly.

• Hide horizontal runs in unfinished walls/ceilings behind crown molding or conduit.

Outlet Boxes

• Use old work boxes with swing clamps for retrofit drywall installation. Cutting the holes accurately takes practice.

• Make sure all junction boxes are easily accessible, not buried behind finishes.

Labelling Circuits

• Label each circuit clearly in the breaker panel noting what it controls. This aids troubleshooting later.

• Outlets controlled by light switches should be labelled to avoid confusion.

Testing

• Verify safe operation of all outlets, switches and devices before finish restoration. Catch mistakes early!

Taking it slow and methodical makes installing new wiring much less stressful. Patience and planning are key.

Helpful Historical Resources

For anyone undertaking major electrical renovations in an old home, these resources can provide invaluable assistance:

• Library archives - Amazing how-to guides can be found here from the early 20th century.

• Historical societies - Local groups are passionate about preserving heritage buildings and often have extensive experience with period-appropriate electrical work. Their members are full of practical advice.

• Old homeowner forums - Connect with others who have upgraded old wiring and can share their lessons learned.

• Vintage electrician tools - Sometimes obsolete tools are needed for extracting old wiring or installing replacements in a historically sensitive way. eBay and flea markets are great sources.

• Electrical history museums - There are some niche museums focused just on the history of lighting and wiring technology. Visiting them provides fascinating insights into old systems.

Learning from the past is a great way to preserve it while adapting old homes for safe modern living.

Conclusion

Rewiring a historic home takes research, patience and care. But armed with the proper safety gear and knowledge of obsolete wiring methods, the project can be tackled successfully without injury or damage. Always seek experienced help if unsure. And remember, anything in a home over 50 years old requires extra caution and understanding to rewire safely. With the right approach, your newly rewired home will function beautifully for many years to come.