How to Build a DIY WiFi Extender and Boost Your Signal
Connecting more devices to your home WiFi network can often lead to a weak signal in parts of your house. Rather than purchasing an expensive new router or range extender, you can build your own DIY WiFi booster using common household items. With just a little bit of technical know-how, you can amplify your wireless signal and enjoy faster internet speeds.
Why Your WiFi Signal Gets Weak
There are a few key reasons why your WiFi signal may become weak in certain areas:
Distance from the Router
WiFi signals get weaker the farther you move away from the router. Walls, floors, and other objects can also block or absorb the signals. So if your router is on the first floor but you need WiFi in the basement, the signal has to pass through the floor which attenuates it.
Interference from Other Devices
Nearby electronics like baby monitors, cordless phones, microwaves, and Bluetooth devices can all potentially interfere with WiFi signals if they operate on a similar radio frequency. Having too many WiFi networks in close proximity can also cause interference.
Obstacles and Building Materials
Thick walls, metal objects, mirrors, and brick fireplaces can all degrade WiFi signals. Newer homes often have better wireless coverage because they tend to use building materials that absorb less RF energy.
Overloaded Network
If you have lots of users and devices connecting to one router, the demands on the router can overwhelm it and result in slower speeds and spotty coverage. Upgrading to a newer dual or tri-band router can help mitigate this issue.
How a WiFi Extender Works
A WiFi range extender (also called repeater) works by receiving your existing WiFi signal, amplifying it, and then rebroadcasting the boosted signal. It works in tandem with your router to expand the overall coverage in your home.
There are two main types of extenders:
-
Single-band extenders - These can only amplify a 2.4 GHz or 5 GHz network band individually.
-
Dual-band extenders - More advanced models that can boost both bands concurrently. This is preferable if you have a dual-band router.
When extending WiFi, you want to make sure you place the extender in a location where it can pick up a reasonably good signal from your router to start with. It can't work magic - if the source WiFi signal reaching the extender is already very weak, then the rebroadcast signal will also be weak.
Choosing the Right Hardware
To build a DIY WiFi extender, you need two things:
-
A spare wireless router - This will function as the actual extender.
-
A bridge or repeater cable - This wired cable connects your main router to the spare one.
Wireless Router
Ideally, you should use a router that supports wireless bridging, repeating, or client modes. This allows you to change the spare router's function from a network creator to a network expander.
Many cheap, old, or secondary routers have these modes. If your main router is dual-band, get a matching dual-band spare if possible.
You can also use a wireless access point instead of a router, if you have one. The concept is the same.
Bridge/Repeater Cable
This Ethernet cable connects your primary router to the secondary repeater router. The length depends on how far apart the two routers will be placed.
-
For shorter runs under 100 feet, Cat 5e or Cat 6 Ethernet cable works well.
-
For longer cable runs, a powerline Ethernet adapter kit sends the signal through your electrical wiring.
-
Or for ultimate flexibility, use a high-quality outdoor-rated Ethernet cable to place routers in separate buildings.
Step-by-Step Setup Guide
Follow these steps to configure your spare router as a DIY range extending repeater:
Step 1: Update Router Firmware
Before getting started, update your main and secondary router firmware to the latest versions. This ensures compatibility and that repeater/bridge mode is supported.
Step 2: Place the Extender Router
Determine where you need better WiFi coverage and place your secondary router in that location. Ideally choose a central spot where the router can pick up a medium/strong signal from the main router.
Step 3: Connect Routers
Connect your main router to the extender router using the wired bridge cable.
-
For adjacent rooms, a 50 ft Ethernet cable is usually sufficient. Use coupler fittings to link shorter cables if needed.
-
For longer runs across the house, powerline adapters send Ethernet through electrical wiring.
Step 4: Configure Extender as Repeater
Access the admin interface of the secondary router. Look for settings like:
- Wireless Distribution System (WDS)
- Wireless Bridging
- Wireless Repeating
- Client Mode
Enable one of these modes. The router will stop acting as a separate WiFi network and instead become an extender.
Step 5: Align WiFi Settings
In your main router, make sure:
- SSID network names match on both 2.4GHz and 5GHz bands.
- Security settings match (WPA2, password etc).
- Auto channel selection is enabled so the routers can choose the best frequency.
Step 6: Position Antennas
Angle the antennas on both units to point toward each other. This helps maximize signal strength between them.
Step 7: Test Expanded Coverage
Now your extender router should be active! Walk around the house and do speed tests to check for improved WiFi coverage.
Troubleshooting Tips
If your DIY repeater isn't working properly, a few things to check:
-
Router firmware - update to latest versions if needed.
-
Try an alternate repeater mode like WDS or client mode.
-
Analyze WiFi signals with a smartphone app to optimize repeater placement.
-
Change broadcast channels or bands for less interference.
-
Add higher gain aftermarket antennas to both routers.
-
Most importantly, verify the main router to extender cable has a solid Ethernet connection.
Benefits of a DIY WiFi Range Extender
Building your own WiFi booster using a spare router provides the following helpful benefits:
-
Cheaper than buying a commercial range extender.
-
Flexible positioning options to amplify signals anywhere needed.
-
Better performance by using Ethernet backhaul instead of half-duplex WiFi.
-
Upgrades older routers to get more value from your existing equipment.
So don't put up with dead zones in your home's WiFi coverage! With this guide, you can leverage an unused router and enjoy stronger wireless in hard-to-reach areas. Get better speed for streaming, gaming, and anything else online.